It is currently Fri Nov 16, 2018 3:59 pm




Post new topic Reply to topic  [ 7 posts ] 
 anamorphic lens 
Author Message
User avatar

Joined: Wed Oct 16, 2013 4:07 am
Posts: 293
Post anamorphic lens
hi all,
in a bid to distinguish myself from the crowd :roll: i have bough a couple of old school anamorphic projection lenses. also bought an anamorphic lens for the gopro. the plan is to use the gopro with the anamorphic adapter to be up and running straight away while i cobble / make something for projection lenses i bought. i could have bought an actual anamorphic lens for a camera but where's the fun in that ? anamorphic projector lenses are much cheaper to buy but there is some setup involved in getting them to work with camera lenses. its been abit like christmas in june here at the moment. let me just say projector lenses are huge waaay bigger than say pentax takumars lol
Image

Image

Image

Image


Sun Jul 01, 2018 1:20 am
Profile

Joined: Wed Jan 20, 2010 4:50 pm
Posts: 552
Post Re: anamorphic lens
Hi. Is the black one Russian? They seem the most common on ebay.

The Isco should be good, was it expensive?

Should be able to separate the anamorphic front and use it with your Takumar lenses?


Sun Jul 01, 2018 10:12 pm
Profile
User avatar

Joined: Wed Oct 16, 2013 4:07 am
Posts: 293
Post Re: anamorphic lens
yes the black one is a russian the first time i searched for one only a few turned up on the search engine i bought the cheapest one that looked the cleanest (hint people trying to sell stuff aught to at least make an effort for it to look presentable) i bought the isco a couple of days later. since then i been getting pages of results for the russians it's bloody weird that i could only find half a dozen the first time round. i could turn into a conspiracy theorist if this keeps up. ordered some support rails ,clamps cheese plates and a lens wrench just in case :-) . the first takumar i bought was declicked which may come in handy. surprisingly the canon fd 50 mm 1.4 ranks quite highly as a taking lens which is fortuitous as i have one stowed away with a t90 only problem is fd won't fit on ef mounts bit of an issue with flange mount differences from memory but i have an early canon that won't do hd so maybe i may start looking around for a new camera for hd perhaps. lots of experimenting and research to come :D


Mon Jul 02, 2018 8:44 am
Profile
User avatar

Joined: Wed Oct 16, 2013 4:07 am
Posts: 293
Post Re: anamorphic lens
not exactly anamorphic,
but i also bought a copy of an s40 steadycam to play with might be overkill for a gopro but it does balance up nicely with two on top :)
Image
i all ready modded it, the silver tube between the handle and gymbal adds 25mm of extension. i must have big hands perhaps The two quick release mounts i bought have levels on two corners which actually works quite well for balancing the thing however i think i will turn them 180 degrees so that their visible from the outside. their quite tiny but easier to use in the sun


Mon Jul 09, 2018 3:24 am
Profile
User avatar

Joined: Wed Oct 16, 2013 4:07 am
Posts: 293
Post Re: anamorphic lens
i have since learned off the internet that with the 2x projection lens that 63 mm is the shortest lens you can use but you have to modify your taking lens and its not a normal lens but a 63mm el nikor enlarging lens, 75m is the shortest normal lens you can use and 85mm works with no vignetting generally i hope to have a few more pics shortly


Tue Aug 14, 2018 8:38 pm
Profile
User avatar

Joined: Wed Oct 16, 2013 4:07 am
Posts: 293
Post Re: anamorphic lens
bought myself a letus gropro anamorphic adapter it only fits the gopro 3 and gopro 4, it wont fit a 6 as i tried lol. i got mine through b&h photo its been on backorder for a couple of weeks then the usual ship to australia so i been waiting patiently, finally arrived friday. didn't take long to mount it up. you have too take the old lens cover off and replace it with the letus adapter. it uses the same rubber for waterproofing. had a few smallrig bits turn up as well heres a couple of photos

Image

Image

this is a mock up of where i'm heading still have to grind the 3/8 down flat as it sits proud at the moment and i cant mount the base to the steadycam. i also have to cut the head of a bolt which will allow me to mount the mic shock mount to the small rig extension rod. that's tomorrows job


Mon Aug 20, 2018 2:54 am
Profile
User avatar

Joined: Wed Oct 16, 2013 4:07 am
Posts: 293
Post Re: anamorphic lens
ok i am now finished to a certain degree just have to buy a mic and the little black box that allows you too connect up to any of the later gopros
just in time for a rodeo in the next couple of weeks

Image


Tue Aug 21, 2018 2:36 am
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore. pozycjonowanie