Timescapes - Digital Timelapse Discussion
http://forum.timescapes.org/phpBB3/

Diy 5D mark II power solution
http://forum.timescapes.org/phpBB3/viewtopic.php?f=12&t=5214
Page 1 of 1

Author:  jungin5656 [ Tue Aug 16, 2011 4:38 pm ]
Post subject:  Diy 5D mark II power solution

please, help me!
I'm having a trouble finding out how to power a 5D mark II with an external power source. I've bought a battery, emptied the contents and soldered wires to the - and + poles of the battery. From there the wires go down to a larger video camera battery, which delivers the same voltage as the standard LP-E6-battery used in the 5DII.
The problem is that the 5D won't power up at all. I've measured the current, and the voltage is right, and I have not mixed up the - and + on the battery.
Could the problem be related to the fact that I've thrown away the electronics in the battery? Does the camera need any form of input on the T and C-connectors?

I have an ac adapter ac-e6. It has dummy battery, so I try again with ac-e6 jack but camera dosen't work.
Other cameras work well. 5D mark II has any secret? please help me! I'd like to diy.

Author:  iCe [ Sat Aug 20, 2011 8:00 am ]
Post subject:  Re: Diy 5D mark II power solution

I have an older version of this that I use to power a flash and it's a beast. The version that I linked to will also power a camera. My old one won't.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/