It is currently Mon Sep 21, 2020 11:11 pm




Post new topic Reply to topic  [ 2 posts ] 
 Dolly Drive System 
Author Message

Joined: Sun Jun 19, 2011 8:06 am
Posts: 2
Post Dolly Drive System
So, I've acquired all the parts needed to build my own motion control system. I have the plans for the electronics all finished, but I've encountered a problem. The motor I have has an MXL size gear head on the top, maybe 20 teeth around. But finding a 12 foot MXL belt is not possible. Heck, finding someplace that will sell me an MXL belt of any size whatsoever, is hard.

I planned on putting the stepper motor on one end of the track, and having the belt loop around a freewheel on the opposite side. I could clamp my sled to the moving belt, and there you go! But without a belt, this doesn't work.

I've heard of other kinds of belts, what type of belt system could I use that isn't this miniature type? I'm looking to get this finished inside of this next week, because I do not have much time.

If getting a belt is not an option, what alternate systems could I use to drive my dolly? I'd like to keep the motor assembly off the dolly.

The collective knowledge of this forum is awesome.

Thanks!

Collins


Sun Jun 19, 2011 8:11 am
Profile
User avatar

Joined: Sat May 07, 2011 10:24 am
Posts: 316
Location: Netherlands
Post Re: Dolly Drive System
I don't know if this is helping you; but this is what I am building right now.

I use a T10 belt: http://www.damencnc.com/en/components/m ... ulleys/383

This is not a closed loop, but very strong. The belt is 16mm wide and strengthened with steal wires. I have just tested my dolly yesterday with it and it worked great. My belt system is very similar to the one that DP is using. I use a worm gear http://www.ondrives.com/gearboxes-reduc ... ma-17.html to make it all work. Overall not cheap (to say the least), but you can drag a car with this thing :-).

I am planning a post about my dolly when its ready. That will take some time because I want to machine a few parts differently and I am testing different stepper drivers and voltages.

_________________
eMotion Control Store - http://www.elysiavisuals.com
Exposure ramping with Nikon and Canon - http://www.elysiavisuals.com/catalog


Sun Jun 19, 2011 12:29 pm
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore. pozycjonowanie