It is currently Sun Dec 15, 2019 3:09 am




Post new topic Reply to topic  [ 10 posts ] 
 how do i remove the stop in Meade DS-2000 mount? 
Author Message
User avatar

Joined: Tue Feb 10, 2009 3:27 pm
Posts: 24
Post how do i remove the stop in Meade DS-2000 mount?
sorry if this has been covered (and i faintly remember mention of it in some post i read), but how do i remove the stop inside the DS-2000's tilting mechanism (up/down)?


Fri Feb 13, 2009 2:42 pm
Profile
Post Re: how do i remove the stop in Meade DS-2000 mount?
ah yes. I've never done it myself but Matt Dolink pointed me to the part that needs to be removed... It seemed straightforward, I know tmo has done it as well. Hopefully he'll chime in here.


Sat Feb 14, 2009 8:21 am
User avatar

Joined: Wed Apr 16, 2008 9:49 pm
Posts: 349
Location: Troutdale, OR http://www.vimeo.com/ac
Post Re: how do i remove the stop in Meade DS-2000 mount?
If you disassemble the upper portion you'll see it, it's a little plastic tab about 3/4" wide, just cut it off with a hacksaw and you're good to go. I know Matt had a picture of it but I can't find it.

_________________
Andrew Curtis http://www.ffwdtime.com


Sat Feb 14, 2009 10:02 am
Profile
User avatar

Joined: Tue Feb 10, 2009 3:27 pm
Posts: 24
Post Re: how do i remove the stop in Meade DS-2000 mount?
how does the "upper part" disassemble? by popping off the silver, outer plastic cover? one has to remove the big compass knob first, i assume?
a picture would help a visual guy like me tremendously.

some people mentioned that they saw no need for more than a 90 degree freedom on that axis, but i can already see the advantage of starting a timelapse while pointing the camera down toward the ground, then tilting it up towards the crown of trees, for example, during the course of a day.
next time i'm back up in San Francisco, i'll have to take the rig into Muir Woods or some of my lesser known roaming grounds up there (Bolinas, Pescadero, San Gregorio Valley, etc.).

if only someone had come out with a decent application for motion control for this thing...i am surprised that this niche hasn't been tapped yet...i know you've been working on something, milapse, but it's strange that you seem to be the only one that is doing serious work on addressing these pretty ubiquitous mounts/controllers.


Sat Feb 14, 2009 10:20 am
Profile
User avatar

Joined: Tue Feb 10, 2009 3:27 pm
Posts: 24
Post Re: how do i remove the stop in Meade DS-2000 mount?
bump...

anyone have any links with a disassembly guide, or a quick how-to of what screws/panels to remove in what order?

also, while inside, are there any known improvements that can be done by replacing/tweaking anything? for example, can the gears be changed to aluminum or other metal gears for a more durable operation?


Sun Feb 15, 2009 3:43 pm
Profile
User avatar

Joined: Wed Apr 16, 2008 9:49 pm
Posts: 349
Location: Troutdale, OR http://www.vimeo.com/ac
Post Re: how do i remove the stop in Meade DS-2000 mount?
Attached is Matt Dolnik's image of the tab you cut.

I don't think you need to do anything to it, metal gears would shave particles off and you'd never find one that fits.


Attachments:
IMG_9204.jpg [111.27 KiB]
Downloaded 769 times
IMG_9204.jpg
IMG_9204.jpg [ 111.27 KiB | Viewed 4648 times ]

_________________
Andrew Curtis http://www.ffwdtime.com
Wed Feb 18, 2009 8:42 am
Profile
User avatar

Joined: Tue Feb 10, 2009 3:27 pm
Posts: 24
Post Re: how do i remove the stop in Meade DS-2000 mount?
aha! thanks Andrew...

do you know how i remove that motor? is it just a matter of removing the nut at the center, inside of the 4 screws that also hold the camera L plate?


Wed Feb 18, 2009 11:40 am
Profile

Joined: Fri Mar 13, 2009 6:25 am
Posts: 2
Post Re: how do i remove the stop in Meade DS-2000 mount?
Hi, First post here.
I´m waiting for delivery on my Meade 2000 too and is definetly going to get rid of that stop thingy.
Would be great if anyone had more pictures of the motor removal so I dont mess my new gear up....

Thank´s

Husse


Fri Mar 13, 2009 6:32 am
Profile

Joined: Fri Mar 13, 2009 6:25 am
Posts: 2
Post Re: how do i remove the stop in Meade DS-2000 mount?
Hi again.
So i just got my DS-2000 and decided to take the stop thingy away.
It was actually very straight forward as described in earlier posts.
1. remove the big center nut.
2.remove the big plastic star nut on the opposite side, (be careful not to drop the little greasy plastic thing in the hole).
And also remove the "squarish" flat nut from the bolt
3. gently pull the whole package out. (don´t be scared when you realize that the kogg wheel is quite sloppy and loose. I guess it is supposed to be that, anyway mine was and I thought I messed something up.)
4. take cutting pliers and cut away the plastic stop bit, it´s not conected all the way, only at the ends.
5. Assemble everything back again, voila!

Sorry for my bad english...


Wed Mar 25, 2009 8:53 am
Profile

Joined: Sat Jun 20, 2009 8:47 am
Posts: 6
Post Re: how do i remove the stop in Meade DS-2000 mount?
Thank You for making a post abot this :)
I just removed the little plastic piece and now it works great.

Must say that this forum is wonderful! :D


Sun Jun 28, 2009 11:56 am
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 


Who is online

Users browsing this forum: Google [Bot] and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore. pozycjonowanie