|Timescapes - Digital Timelapse Discussion
|Mount for Meade DS-2000
|Page 1 of 1|
|Author:||howme [ Tue Mar 03, 2009 4:16 pm ]|
|Post subject:||Mount for Meade DS-2000|
I had been working on a nice mount for the Meade DS-2000 and I can't get it made right now. But it is based off what I saw at this link:
My rendition my not be the best and there are still some things you would have to figure out for yourself (and would be camera specific), like the actual way you wish to have the mount for your camera and the screws you wish to use to attach the 2 parts (I left this part blank because I wanted to use similar screws that were in the video and was going to supply them to the machinist with these plans).
Also the idea for the slight changes on this mount vs. the one in the video listed above was to be able to mount the camera on either side of the bottom plate.
Feel free to use and change, though I am curious what changes you guys would suggest.
|Page 1 of 1||All times are UTC - 8 hours|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group