It is currently Sat Aug 15, 2020 12:17 pm




Post new topic Reply to topic  [ 2 posts ] 
 telescope heads to use with MX2 
Author Message

Joined: Wed May 07, 2014 2:03 am
Posts: 32
Post telescope heads to use with MX2
Hi All,

i'm looking into purchasing a Merlin head soon; was just wondering if any other pan/tilt telescope heads will work the same way as Merlin does with MX2?

Thanks for your help in advance,

fazi27


Wed Oct 15, 2014 10:52 pm
Profile

Joined: Thu Feb 18, 2010 4:47 am
Posts: 388
Location: St Gallen, Switzerland
Post Re: telescope heads to use with MX2
I found the Merlin a pain to work with the MX2. Too many cables, adaptors and ports let me down. In the end I gave up and coughed up the extra money for an Emotimo TB3. You can use the TB3 to control the MX2 or vice-versa, in each case firing the slave device from the camera`s pc port or hot shoe. Of course you could forget about the MX2 completely and run dolly stepper motors from the TB3`s aux port and then you have the advantage of repeatability and much more control on the dolly axis. The advantage of having the MX2 in the set-up is that it frees up the aux port of the TB3 for some other axis eg lens (focus or aperture or zoom) control.


Thu Oct 16, 2014 12:46 am
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore. pozycjonowanie