Timescapes - Digital Timelapse Discussion
http://forum.timescapes.org/phpBB3/

HELP Intervalometer for a Panasonic Lumix DMC-GF1
http://forum.timescapes.org/phpBB3/viewtopic.php?f=28&t=10454
Page 1 of 1

Author:  unozig [ Fri May 03, 2013 4:16 pm ]
Post subject:  HELP Intervalometer for a Panasonic Lumix DMC-GF1

Im looking to buy next week, a used Panasonic Lumix DMC-GF1 body to use for a TL project.

Will get adapter for either Canon or Nikon lens.

Spoke to Antz who said there may be some issues with using third party ( Chinese Copy) intervalometers.

Anybody using this camera for TL and can recommend a intervalometer?

Author:  Antz [ Fri May 03, 2013 9:41 pm ]
Post subject:  Re: HELP Intervalometer for a Panasonic Lumix DMC-GF1

I noticed they have some on eBay specifically for them...
http://www.ebay.com/itm/Camera-LCD-Time ... 4171c14acd

Author:  DigiSnapMark [ Sat May 04, 2013 7:11 am ]
Post subject:  Re: HELP Intervalometer for a Panasonic Lumix DMC-GF1

Our DigiSnap 2100 and 2700 controllers work fine with the GF1... I know as I have a GF1 which I use occasionally. I don't know why other intervalometers don't work, as we all use the half-press and full-press signalling...

Author:  Antz [ Sat May 04, 2013 5:14 pm ]
Post subject:  Re: HELP Intervalometer for a Panasonic Lumix DMC-GF1

I think from memory the GF1 requires a resistive loop, not just a straight closed circuit.

Author:  DigiSnapMark [ Sun May 05, 2013 8:04 pm ]
Post subject:  Re: HELP Intervalometer for a Panasonic Lumix DMC-GF1

Oops of course... it is a 3 state resistive interface. Yes, we make an adapter cable.

Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/