|
Register •
FAQ
• Search • Login
|
|
It is currently Thu Mar 04, 2021 7:40 am
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 4 posts ] |
|
Author |
Message |
Astroman
Joined: Thu Jul 22, 2010 10:10 pm Posts: 86 Location: Paralowie, South Australia
|
 MX2 to Camera cable
Hi all,
is the cable that goes between the MX2 and the Camera (in my case a Canon 1100D (E3 plug)) use straight through wiring between the 2.5mm and 3.5mm jacks? Does anyone have a schematic of the cable.
Thanks.
_________________ Andrew Wall, South Australia.
|
Tue May 13, 2014 7:10 pm |
|
 |
RogerBotting
Joined: Mon Feb 01, 2010 2:33 pm Posts: 281 Location: Victoria, Canada
|
 Re: MX2 to Camera cable
If you have the cable, use your voltmeter to do a schematic. No voltmeter? light bulb and a AA battery will do.
|
Thu May 15, 2014 10:13 am |
|
 |
Astroman
Joined: Thu Jul 22, 2010 10:10 pm Posts: 86 Location: Paralowie, South Australia
|
 Re: MX2 to Camera cable
Hi Roger,
I am asking if the wiring is straight through so I can make my own, that is why I asked for the schematic. Apologies, I should have worded it better. If it's just a standard plug on each end with tip to tip etc... wiring I will make my own up.
_________________ Andrew Wall, South Australia.
|
Thu May 15, 2014 12:35 pm |
|
 |
Astroman
Joined: Thu Jul 22, 2010 10:10 pm Posts: 86 Location: Paralowie, South Australia
|
 Re: MX2 to Camera cable
Thanks to Dynamic Perception on Facebook I was able to get the answer I was looking for, thanks.
_________________ Andrew Wall, South Australia.
|
Thu May 15, 2014 11:51 pm |
|
 |
|
|
Page 1 of 1
|
[ 4 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|