Timescapes - Digital Timelapse Discussion

MX2 Dollyshield firmware upload Problems.
Page 1 of 1

Author:  noomitsara [ Sat Jan 12, 2013 10:04 am ]
Post subject:  MX2 Dollyshield firmware upload Problems.

MX2 Dollyshield upload Problems.

I'm asking for help.
I'm getting started for Arduino. Problems in firmware upload MX2 Dollyshield.
- Board : Arduino Uno (ATmega328p-PU)

- Sofware : Arduino 0023


Error code:
avrdude: verification error, first mismatch at byte 0x7000
0x9f != 0xff
avrdude: verification error; content mismatch

Arduino-error.jpg [ 323.41 KiB | Viewed 3008 times ]

Author:  shutterdrone [ Sun Jan 13, 2013 8:29 am ]
Post subject:  Re: MX2 Dollyshield firmware upload Problems.

I would try another Arduino board, or try to burn a new bootloader onto that Arduino board (using an ISP programmer). Content mis-matches when verifying the sketch tend to be indicative of damaged or out-of-spec Atmega chips.


Page 1 of 1 All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group