
Tiltshift timelapse question
Hey timescapes,
I'm starting work on a tiltshift project and after some research have a few questions perhaps some more experienced users can answer.
Differing from timelapses I'm used to doing that range from 3 seconds between shots to 30 sec night exposures, successful tiltshift intervals needs to be far shorter in duration between shots to get the desired miniature effect.
For example, Paul Garcia Laita's tiltshift of Girona (
http://vimeo.com/99370876 ) used an a Canon 60d and fast sd card w/intervalometer locked on burst mode. He stated:
"I shot on burst mode continuously, at 5.3 pictures per second which is the maximum my 60D is able, for 2-3minutes depending on the action that was happening. 5.3 is the speed of the burst mode, a little more than 5 pictures per second. I had to lower the quality of the pictures and have a fast sd card for the camera to handle it along 2-3minutes. "
Is there anyway this is possible without shooting JPEG? Canon's website states burst rates and frames per second for various file types. 60d has a fps rate of 5.3 but a burst rate of only 53 for jpeg, and for raw only 16 - meaning that after the initial burst rate the camera would have to pause to record on the memory card. (
http://www.learn.usa.canon.com/resource ... ates.htmlp)
I'm curious because it seems like even the slightest pause when the camera is writing to the memory card after the burst rate will negatively impact the playback and miniature flow of a tilt-shift in post.