It is currently Tue Sep 19, 2017 9:36 pm




Post new topic Reply to topic  [ 11 posts ] 
 Video sequence using DP Stage zero dolly 
Author Message
User avatar

Joined: Tue Nov 24, 2009 7:55 am
Posts: 940
Location: UK
Post Video sequence using DP Stage zero dolly
Taken in the Forest of Dean in the latter part of April.
Experimenting with a Dynamic Perceptions Stage Zero system fitted with a 25RPM drive motor. The faster motor is more suited to video than the standard 8RPM time-lapse motor.
The sequence includes clips with the rail set at approximately 30 degrees from horizontal whilst zooming and focus pulling, horizontal tracking whilst zooming and ending with straight tracking across a small stream.


_________________
Smile, it gives your face something to do!

http://www.vimeo.com/user1214873/videos
http://www.youtube.com/user/MrReggub


Sun May 22, 2011 1:55 pm
Profile
User avatar

Joined: Mon Jun 07, 2010 6:07 am
Posts: 627
Location: Sydney
Post Re: Video sequence using DP Stage zero dolly
Interesting.

Owen

_________________
Red Epic Dragon & Scarlet Rental Sydney
http://www.driftwoodcinema.com


Fri May 27, 2011 5:41 pm
Profile

Joined: Tue May 26, 2009 5:28 am
Posts: 61
Post Re: Video sequence using DP Stage zero dolly
WOW that first pull was such a drastic shift in perspective. well done sir.


Thu Jun 02, 2011 7:34 pm
Profile

Joined: Sun Oct 03, 2010 10:25 am
Posts: 128
Post Re: Video sequence using DP Stage zero dolly
Nice one Mike!!
very nice change of focus and zoom. How did you managed such smooth results, did you have someone helping?
Were you using any follow focus?
What zoom lenses were you using?
I also been testing my new motor and using the Okii USB follow focus to change focus, its great cos you can save focus up to 4 focus points and then change between them at a press of a button.

Great stuff, the endless wonders of the Stage Zero :)

_________________
http://www.flickr.com/photos/grury/
http://www.photos.grury.me.uk/
http://www.grury.me.uk/
http://vimeo.com/grury


Fri Jun 03, 2011 1:51 am
Profile
User avatar

Joined: Tue Nov 24, 2009 7:55 am
Posts: 940
Location: UK
Post Re: Video sequence using DP Stage zero dolly
Thank you for your comments.

Grury wrote:
Nice one Mike!!
very nice change of focus and zoom. How did you managed such smooth results, did you have someone helping?
Were you using any follow focus?
What zoom lenses were you using?
I also been testing my new motor and using the Okii USB follow focus to change focus, its great cos you can save focus up to 4 focus points and then change between them at a press of a button.

Great stuff, the endless wonders of the Stage Zero :)


My helper was Sony ;) My video camera can be set-up to do A to B transition shots. It needs to be set to Auto mode then zoom, exposure, focus and a few other parameters can be programmed into the A and B positions. The transition can be varied from 3 to 90 seconds, the transition is independent of the dolly move but with a little experimentation and practice some interesting moves can be performed.
The lens is the the Sony G-lens with a x20 optical zoom range with a 35mm equivalent of approximately 29-500 mm.

Your Okii sounds interesting, I have just received some gearing and hardware so the next rainy day I shall look at re-building the above set-up - maybe ;)

MikeA.

_________________
Smile, it gives your face something to do!

http://www.vimeo.com/user1214873/videos
http://www.youtube.com/user/MrReggub


Fri Jun 03, 2011 6:07 am
Profile

Joined: Tue May 03, 2011 3:13 pm
Posts: 35
Post Re: Video sequence using DP Stage zero dolly
Hey thanks for posting that! I've been looking to see examples of video work done with this dolly and this is exactly what I needed to see!


Fri Jun 03, 2011 6:12 am
Profile
User avatar

Joined: Tue Nov 24, 2009 7:55 am
Posts: 940
Location: UK
Post Re: Video sequence using DP Stage zero dolly
Jay wrote:
Hey thanks for posting that! I've been looking to see examples of video work done with this dolly and this is exactly what I needed to see!

Hi, Jay,
Good to hear it was useful, I used a home brew controller for that sequence,Maplin motor control board I think, so that I could ramp the dolly start and stop speed.

MikeA.

_________________
Smile, it gives your face something to do!

http://www.vimeo.com/user1214873/videos
http://www.youtube.com/user/MrReggub


Fri Jun 03, 2011 6:19 am
Profile

Joined: Thu Jan 26, 2012 10:56 am
Posts: 3
Post Re: Video sequence using DP Stage zero dolly
Can you send to us link to the shop with yours motor? Or maybe Do you have some links with other motors works with MX2?


Sun Apr 15, 2012 9:50 am
Profile
User avatar

Joined: Tue Nov 24, 2009 7:55 am
Posts: 940
Location: UK
Post Re: Video sequence using DP Stage zero dolly
tokarool wrote:
Can you send to us link to the shop with yours motor? Or maybe Do you have some links with other motors works with MX2?


Hi, this the link for the 25RPM motor for the DP S0, it is a straight swap out for the standard 8.25RPM motor : http://www.servocity.com/html/25_rpm_of ... motor.html

The basic controller to which I have added power, reversing switch and power connectors is here: http://www.maplin.co.uk/panel-mounted-s ... dule-30310

Hope above is of some use to you. Servocity do a controller but a bit pricey I believe.
Regards MikeA.

_________________
Smile, it gives your face something to do!

http://www.vimeo.com/user1214873/videos
http://www.youtube.com/user/MrReggub


Sun Apr 15, 2012 10:16 am
Profile
User avatar

Joined: Wed Nov 11, 2009 10:45 am
Posts: 1676
Location: Merritt Island, Florida, Estates Unitas
Post Re: Video sequence using DP Stage zero dolly
Those are some amazing moves. Its almost creepy to have all this beautiful nature and serenely slow MOCO in a shot where the extreme moves are trying so hard to excite me. Its like throwing a kegger in a library. You're setting the bar awfully high for the rest of us.

Please forgive my naive question, but.... The focus and zoom were done in-camera? You set the beginning and end points and the speed to move from one to the next? Does the entire shot need to be scripted, or can you program a slow zoom with ramping and play it back whenever something zoom-worthy happens? What kind of cameras do this? Maybe I've been spending too much time with my DSLRs.

Wait! I just noticed what thread we're on. Its in 3-D as well? The cameras converge as well as focus and zoom? Would you be interested in trading your rig for my house? Totally awesome shots Mike.


Mon Apr 16, 2012 11:10 am
Profile
User avatar

Joined: Tue Nov 24, 2009 7:55 am
Posts: 940
Location: UK
Post Re: Video sequence using DP Stage zero dolly
sciencelookers wrote:
Those are some amazing moves. Its almost creepy to have all this beautiful nature and serenely slow MOCO in a shot where the extreme moves are trying so hard to excite me. Its like throwing a kegger in a library. You're setting the bar awfully high for the rest of us.

Please forgive my naive question, but.... The focus and zoom were done in-camera? You set the beginning and end points and the speed to move from one to the next? Does the entire shot need to be scripted, or can you program a slow zoom with ramping and play it back whenever something zoom-worthy happens? What kind of cameras do this? Maybe I've been spending too much time with my DSLRs.

Wait! I just noticed what thread we're on. Its in 3-D as well? The cameras converge as well as focus and zoom? Would you be interested in trading your rig for my house? Totally awesome shots Mike.


Hi, sorry to disappoint with the 3-D I posted in the wrong forum section :(

Focus, zoom and exposure can all be done in camera, time-settings are from 5 to 90 seconds (5, 10, 15, 30, 60 and 90 ) if I remember correctly. Ramping is linear or S -curve. You can run A to B or B to A, settings are lost when camera is powered down.
A down side is that the move has to be triggered by pressing a small button, ok with a decent video tripod, but can be tricky when mounted to a dolly. Some sort of remote plunger might be possible, unable to trigger via LANC sadly.
The Transition function is buried in the menu system and warrants a two liner in the manual.
The camera is a Sony FX1000e (Europe) and is quite cheap. It uses tape but I have a Sony compact card unit that I use, still requires a tape in the system.
This is the Pro Version here: http://www.sony.co.uk/biz/product/hdvcamcorders/hvr-z5e/overview

MikeA.

_________________
Smile, it gives your face something to do!

http://www.vimeo.com/user1214873/videos
http://www.youtube.com/user/MrReggub


Mon Apr 16, 2012 12:00 pm
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore. pozycjonowanie