Timescapes - Digital Timelapse Discussion :: View topic

dustin wrote:

here's a trick I recently learned to avoid using the clamp on the buttons

Go to the az or alt ratio menu. Have your pan and tilt speeds already to go. Push the button(s) in the direction you want the head to move and at the same time (while holding the direction buttons) hit 'enter' as if you were going to modify your az or alt ratio numbers. Let go of all the buttons and the head will continue to move until you hit 'enter' again.

up up down down left right left right b-a start!!! remember that one?! :lol:

Author:	Timelapses.TV [ Thu Feb 25, 2010 3:27 pm ]
Post subject:	MiLapse tripod
Timelapse`s timelapse

Author:	milapse [ Thu Feb 25, 2010 3:52 pm ]
Post subject:	Re: MiLapse tripod
you know someone has problems when their doing timelapse of timelapse. Intervention?

Author:	Timelapses.TV [ Thu Feb 25, 2010 4:34 pm ]
Post subject:	Re: MiLapse tripod
I made it with the Nikon D300, one shot every 5 seconds. Any problem with this. Any intervention. The zoom was made with motion in finalcut.

Author:	milapse [ Fri Feb 26, 2010 6:30 am ]
Post subject:	Re: MiLapse tripod
dustin wrote: here's a trick I recently learned to avoid using the clamp on the buttons Go to the az or alt ratio menu. Have your pan and tilt speeds already to go. Push the button(s) in the direction you want the head to move and at the same time (while holding the direction buttons) hit 'enter' as if you were going to modify your az or alt ratio numbers. Let go of all the buttons and the head will continue to move until you hit 'enter' again. up up down down left right left right b-a start!!! remember that one?! no kidding! that's interesting.

Author:	SunDevilStormin [ Fri Mar 19, 2010 8:00 pm ]
Post subject:	Re: MiLapse tripod
dustin wrote: here's a trick I recently learned to avoid using the clamp on the buttons Go to the az or alt ratio menu. Have your pan and tilt speeds already to go. Push the button(s) in the direction you want the head to move and at the same time (while holding the direction buttons) hit 'enter' as if you were going to modify your az or alt ratio numbers. Let go of all the buttons and the head will continue to move until you hit 'enter' again. up up down down left right left right b-a start!!! remember that one?! Just got my Meade head and 497 controller and this works great! Any subsequent button press will disable the motors

Timescapes - Digital Timelapse Discussion http://forum.timescapes.org/phpBB3/

MiLapse tripod http://forum.timescapes.org/phpBB3/viewtopic.php?f=7&t=1879	Page 1 of 1

Page 1 of 1	All times are UTC - 8 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/