| It is currently Wed Jan 20, 2021 2:59 am |
|
All times are UTC - 8 hours |
 
|
Page 1 of 1 |
[ 5 posts ] |
| Print view | Previous topic | Next topic |
| Author | Message |
|---|---|
 Joined: Wed Apr 22, 2009 5:41 pm Posts: 127 Location: Spain |
 MiLapse tripodTimelapse`s timelapse
 _________________ luiscaldevilla.com timelapses.tv motiontimer.com |
| Thu Feb 25, 2010 3:27 pm |
|
 |
|
|
|
Re: MiLapse tripod you know someone has problems when their doing timelapse of timelapse.
 Intervention? |
| Thu Feb 25, 2010 3:52 pm |
|
|
|
|
Joined: Wed Apr 22, 2009 5:41 pm Posts: 127 Location: Spain |
Re: MiLapse tripod I made it with the Nikon D300, one shot every 5 seconds. Any problem with this. Any intervention.
The zoom was made with motion in finalcut. _________________ luiscaldevilla.com timelapses.tv motiontimer.com |
| Thu Feb 25, 2010 4:34 pm |
|
|
|
|
|
Re: MiLapse tripod dustin wrote: here's a trick I recently learned to avoid using the clamp on the buttons Go to the az or alt ratio menu. Have your pan and tilt speeds already to go. Push the button(s) in the direction you want the head to move and at the same time (while holding the direction buttons) hit 'enter' as if you were going to modify your az or alt ratio numbers. Let go of all the buttons and the head will continue to move until you hit 'enter' again. up up down down left right left right b-a start!!! remember that one?!  no kidding! that's interesting. |
| Fri Feb 26, 2010 6:30 am |
|
|
|
 Joined: Wed Dec 30, 2009 12:27 pm Posts: 20 |
Re: MiLapse tripod dustin wrote: here's a trick I recently learned to avoid using the clamp on the buttons Go to the az or alt ratio menu. Have your pan and tilt speeds already to go. Push the button(s) in the direction you want the head to move and at the same time (while holding the direction buttons) hit 'enter' as if you were going to modify your az or alt ratio numbers. Let go of all the buttons and the head will continue to move until you hit 'enter' again. up up down down left right left right b-a start!!! remember that one?! Just got my Meade head and 497 controller and this works great! Any subsequent button press will disable the motors |
| Fri Mar 19, 2010 8:00 pm |
|
|
|
|
|
Page 1 of 1 |
[ 5 posts ] |
|
All times are UTC - 8 hours |
Who is online |
Users browsing this forum: No registered users and 9 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |