It is currently Thu Nov 26, 2020 4:09 pm




Post new topic Reply to topic  [ 3 posts ] 
 Software for Dolly Stage zero 
Author Message

Joined: Tue Jan 11, 2011 1:15 am
Posts: 31
Post Software for Dolly Stage zero
hi everyone!
there is a software to control the motion of the dolly stage zero? In the mx2 controller there is a usb port but i can't imagine the way to control from my PC.
I red about a moco software but i can't understand how it works.
Thanks anyone that answer me and sorry again for my english!

Dario


Wed Apr 13, 2011 2:44 am
Profile

Joined: Mon Jul 19, 2010 1:52 pm
Posts: 72
Post Re: Software for Dolly Stage zero
>> there is a software to control the motion of the dolly stage zero? In the mx2 controller there is a usb port but i can't imagine the way to control from my PC. I red about a moco software but i can't understand how it works.

The MX2 controller is a self-contained controller, it doesn't need a PC. The USB port is for downloading new firmware to the (Arduino) control board. "Moco" (=motion control) is open software (project) for the Arduino controller (the same as in MX2) for motion control for TL. Again, you can't use it as such from the PC. The reason that these controllers are self-contained is that most people don't want to take a laptop out in the field (battery use, environment etc)

In essence the dolly contains a motor and in order to make the motor do something you need a piece of electronics which is called the driver (something that supplies the right voltage/current) and, ideally, a control board, a piece of digital electronics that sends the right signals to the driver and listens from input. In theory you could send signals to the controller directly from your PC but most TL people prefer a one-box-does-all controller with a few buttons to controll motor, camera etc. Most people here use an Arduino controller (google Arduino) which you can control via the PC if you like. However, it's as easy to make a self-contained box that does it all so you don't need a seperate PC just to control the controller.

In theory it is not difficult to change the MX2 software (Arduino code) to control it via the PC instead pushbuttons. But it won't be fancy. I am not sure if a GUI client exists for the Arduino. It probably does.

Don't know of any other sw/controllers that does what you want.

Hope this helps.


Mon May 02, 2011 1:38 am
Profile

Joined: Tue Jan 11, 2011 1:15 am
Posts: 31
Post Re: Software for Dolly Stage zero
thanks lenny!


Sat May 07, 2011 4:24 pm
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © phpBB Group.
Designed by Vjacheslav Trushkin for Free Forums/DivisionCore. pozycjonowanie